RZA combines the technical perfection of RMA with advantages of a demountable cabinet. 19" free-standing cabinet with IP 20 protection. RZA has a robust screwed construction. High quality processing and the up-to-date technology ensure a perfect look of the cabinet. Individual RZA parts are joined together by a system of screwed connections to a compact complex with the same maximal loading capacity as a welded cabinet. Most of the parts are joined by Tap-Tite technology thread-forming screws. This ensures a very high solidity of a screwed connection even after a number of demounting. The product is supplied mounted and it is possible to be moved to difficult to reach places after partial or complete dismantling. The hinge system enables almost 180° wide opening of the door. The door can be easily removed and mounted for a change of the door opening direction.REMOVABLE SIDE PANELS AND A REAR COVERRZA is a cabinet with a screwed frame and removable side panels. These are standardly fixed to the frame using a lock with a unified key the same way as the rear coverBREAKOUT-TYPE BLANKING PANELSEntry openings for cables in the rear part of the cabinet are covered with breakout-type blanking panels. To avoid dust penetration, it is possible to seal the cables at the entry opening by a brush strip (370 x 90 mm, supplied with the cabinet), eventually only by a plastic protective frame. A capacious opening in the top covered with a breakout-type blanking panel enables mounting and removal of a Triton fan unit from outside of the cabinet without a need of using screws.CASTORS, NIVELATION NIBSPreparation for mounting of castors, heavy-load castors and nivelation nibsFLEX FRAME (for cabinet width 800 mm)The system enables sliding vertical rails installation in a span of 19", 21" and 23" strictly up to requirements of the applied technology.DOOR FOR FAN UNITSWith this cabinet type, it is possible to order a special metal door with a preparation for mounting of RAx-CH-xxx-X3 fan units.DESCRIPTION, PURPOSE OF USE
- 19" free-standing cabinet with IP20 protection
- Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
- Cabinet construction: Steel frame joined by bolts from welded parts, with removable side panels / Single or double doors in variants fully-metal, perforated (80% air permeability) or glazed with safety tempered glass 4mm. They can be on the front or back of the cabinet
- Max. permissible load of the door is 20 kg.
- Min. thickness of the surface finish is 65 micrometer
- These cabinets are intended for installation data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts (side and rear covers, doors?) are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet.
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point.
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.
OPERATION CONDITIONSOperation environment:
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings).
Must be protected against:
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
Improper manipulation is especially:
- Overloading (maximum recommended load exceeding).
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment.
- Change of the construction or design of the cabinet.
INSTALLATION OF THE CABINET
- To ensure the maximal recommended load, it is necessary to distribute the load equally.
- Place the cabinet on a flat floor and compensate an eventual small roughness with the nivelation feet.
- To avoid dust penetration in a case where cables lead through some of the cable openings, it is possible to seal it with a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply).
ENVIRONMENT PROTECTION
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations.
- Supply includes: 2x Key - rear and side panels, 2x Key - front door, 16x Captive nut M6, 1x blanking panel with brush, 4x Adjustable feet, 4x Nut M10
- Material: Safety hardened glass 4 mm thick, steel sheet
